home *** CD-ROM | disk | FTP | other *** search
/ Cream of the Crop 25 / Cream of the Crop 25.iso / os2 / tmidi210.zip / tmidi.faq < prev    next >
Text File  |  1997-04-11  |  4KB  |  100 lines

  1. tMidi FAQ
  2. Release 2.10
  3.  
  4. Q1: What's so good about version 2 compare to version 1?
  5. Q2: Do I have to remove any drivers from config.sys...?
  6. Q3: I don't hear anything from my -p2: MPU port?
  7. Q4: How can I get a feature/request added?
  8. Q5: For how long is my registration valid?
  9. Q6: Why is the new package filename unchanged...?
  10. Q7: How do I send a Note On/Off to using the -sx switch?
  11. Q8: How can I use tmidi with Netscape's Navigator...?
  12. Q9: How can I use a keyboard as a controller?
  13. Q10: Can I play a MIDI file and the keyboard at the same time?
  14. Q11: I don't hear anything when using -kb: -- why not?
  15.  
  16.  
  17. Q1: What's so good about version 2 compare to version 1?
  18.  
  19. A:  Version 2 uses a new timer-sync technique for near-perfect timing.
  20.     Compare it to any other MIDI player; nothing comes close, and
  21.     certainly nothing that has ever played on OS/2.  The playback is
  22.     smooth from start to finish, all in perfect time.  Other features
  23.     have been added, too, like 32 channel support (w/ two MPUs).
  24.  
  25.     It's recommended that tmidi 2.0 or later be used when using
  26.     Paradise 1.6 or later.  Previous versions of tmidi can be used, but
  27.     the new timer method will not be used.
  28.  
  29.  
  30. Q2: Do I have to remove any drivers from config.sys, or uninstall
  31.     anything?
  32.  
  33. A:  No.  Paradise doesn't care about other drivers.  If you ever
  34.     want to uninstall Paradise, just REM it out of your config.sys.
  35.  
  36.  
  37. Q3: I don't hear anything from my -p2: MPU port?
  38.  
  39. A:  Make sure that the output is live:  Check for line out levels,
  40.     or if you are routing the -p2: into another soundcard, make sure
  41.     that that soundcard has its line in level up, and that any
  42.     connect switch is also live.
  43.  
  44.  
  45. Q4: How can I get a feature/request added?
  46.  
  47. A:  Register, then convince me why it should be added.  If it passes
  48.     my hit list, it may be added in the future.
  49.  
  50.  
  51. Q5: For how long is my registration valid?
  52.  
  53. A:  At least through the current version, so any 2.xx license is valid
  54.     for all 2.xx version levels.
  55.  
  56.  
  57. Q6: Why is the package filename unchanged, even though changes have been
  58.     made?
  59.  
  60. A:  Letter updates (e.g., 2.00 to 2.00a) do not change package names (i.e.,
  61.     tmidi200.zip before and after).  Also, these updates are initially made
  62.     available only from the 40th Floor sites.  They usually have minor updates
  63.     or changes, or have had a feature or two added.
  64.  
  65.  
  66. Q7: How do I send a Note On/Off to using the -sx switch?
  67.  
  68. A:  That's covered in the tmidi.tec file, available to registered users only.
  69.  
  70.  
  71. Q8: How can I use tmidi with Netscape's Navigator to audition/play/save MIDI
  72.     files I find on the web?
  73.  
  74. A:  See tmidigm.cmd and follow the procedure there.
  75.  
  76.  
  77. Q9: How can I use a keyboard as a controller for MPU soundcards?
  78.  
  79. A:  Use the -kb: switch.  See the tmidi.tec file (registered users only) for
  80.     details.
  81.  
  82.  
  83. Q10: Can I play a SMF file and also the keyboard at the same time?
  84.  
  85. A:  Yes.  You may have a volume mismatch (SMF plays to loud, for instance)
  86.     but you could use a second output port (see the -kb: switch) and then
  87.     control the volume levels through the aMixer (see www.40th.com for
  88.     aMixer).  There are other methods to match volumes, but using two
  89.     separate MPUs is the simplest (when aMixer is available).  You may also
  90.     want to make sure the channel you assign to the output is not otherwise
  91.     used by the playing SMF (for example, use channel 16).
  92.  
  93.  
  94. Q11: I don't hear anything when using -kb: -- why not?
  95.  
  96. A:  You may need to initialize your MPU by running one of the ??_on.mid files
  97.     located in the mids\ directory included in this package before your first
  98.     use.
  99.  
  100.